如何有效处理铝合金外壳?铝合金外壳不锈钢之间有很大的区别，铝合金外壳易变形，不锈钢则不易变形。铝合金外壳一般都是用于装饰，而且重量较轻，这就是它的优势所在。铝合金外壳的缺点是它容易变形，所以在使用过程中，必须小心谨慎。

　　下面介绍一下如何有效处理铝合金外壳:

　　1、在使用铝合金外壳前，应先用油擦拭干净外壳表面，以免锈蚀。

　　2、油漆的颜色较浅，应选择深色油漆。

　　3、使用前应检查外壳表面是否有油漆脱落等缺陷，如有脱落，应先用油漆刷补上。

　　4、外壳表面如果锈蚀，可用擦铝粉或磨料擦干净。

　　5、为了延长铝合金外壳的使用寿命，建议在易腐蚀的部位做一些保护处理，如喷漆、涂膜等。

　　以上就是关于如何有效处理铝合金外壳的介绍，希望能帮助到大家。

　　现在，铝合金手机壳占据手机市场份额越来越大，手机厂商也越来越重视铝合金手机壳的设计和制造。铝合金壳材料轻、硬度高，防水防尘性能好，耐磨损性能也很强，目前越来越多的手机厂商开始使用铝合金壳材料。

　　但是，铝合金材料的加工难度较大，壳体表面易起氧化皮、容易生锈，不容易打磨平整。

　　所以，如果想要制作出好的铝合金手机壳，需要注意以下几点：

　　1、采用高品质的铝合金材料。目前市面上使用的铝合金材料大多都是6063铝合金，这种材料虽然质地轻，但是硬度较低，不能满足手机壳的要求。而且6063铝合金在加工过程中容易出现氧化皮，所以需要选择一种更加优质的铝合金材料。

　　2、制作工艺要精良。铝合金材料的加工过程比较复杂，所以制作工艺要精良，经过多道工序才能保证手机壳的质量。

　　3、表面处理要到位。如果铝合金材料的表面处理不到位，易起氧化皮，所以制作工艺要精良，经过多道工序才能保证手机壳的质量。

　　4、打磨平整。表面如果不平整，会影响手机壳的外观，所以需要进行打磨平整。

　　铝合金手机壳具有轻、硬度高、防水防尘、耐磨损等优点，目前越来越多的手机厂商开始使用铝合金壳材料。但是，铝合金材料的加工难度较大，所以制作工艺要精良，经过多道工序才能保证手机壳的质量。

　　Nowadays, aluminum alloy mobile phone shell occupies an increasing market share, and mobile phone manufacturers are paying more and more attention to the design and manufacturing of aluminum alloy mobile phone shell. Aluminum alloy shell is light, has high hardness, good waterproof and dustproof performance, and strong wear resistance. At present, more and more mobile phone manufacturers begin to use aluminum alloy shell.

　　However, the processing difficulty of aluminum alloy is large, and the surface of shell is easy to oxide, rust and not easy to be polished and flat.

　　Therefore, if you want to make a good aluminum alloy mobile phone shell, you need to pay attention to the following points:

　　1. Use high-quality aluminum alloy materials. Most of the aluminum alloys used on the market are 6063 aluminum alloys, which are light in texture but have low hardness and cannot meet the requirements of mobile phone shell. Moreover, it is easy to oxide the surface during the processing of 6063 aluminum alloy, so a more quality aluminum alloy material is needed.

　　2. The manufacturing process should be fine. The processing of aluminum alloy is more complicated, so the manufacturing process should be fine, and the quality of mobile phone shell can only be guaranteed through many processes.

　　3. The surface treatment should be in place. If the surface treatment of aluminum alloy material is not in place, it is easy to oxide, so the manufacturing process should be fine and the quality of mobile phone shell can only be guaranteed through many processes.

　　4. Polishing flat. If the surface is not flat, it will affect the appearance of mobile phone shell, so it needs to be polished and flat.

　　Aluminum alloy mobile phone shell has the advantages of light weight, high hardness, waterproof, dustproof and wear resistance. At present, more and more mobile phone manufacturers begin to use aluminum alloy shell material. However, the processing difficulty of aluminum alloy is large, so the manufacturing process should be fine and the quality of mobile phone shell can only be guaranteed through many processes.